Valspar Trade Emulsion paint base

Description

Product information

The Valspar Trade Tough is water-based for quick drying and low splatter making it both smooth to apply and simple to clean up. Valspar Trade Tough is stain resistant and scrubbable preventing stains from setting into the surface. Perfect for high traffic areas.

• Scrubbable
• Surface Preparation – For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. New plaster and other bare, absorbent surfaces must be sealed prior to painting. Remove old, loose or flaky paint and repair all damaged areas before painting. The surface must be clean, dry and free of dust and grease. Glossy surfaces should be deglossed before painting.
• Instructions for Use – Stir well before use to ensure paint is thoroughly mixed. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge giving you a levelled finish. A tintable primer is recommended when making dramatic colour changes to avoid additional coats. Touch dry in about 1 hour. Allow 2-4 hours between coats. When using a sprayer, refer to the sprayer user guide for full instructions before use. You can dilute this paint with water, however, when you dilute the formula you dilute the quality. Therefore, we cannot guarantee the claims we make on pack if the formula is diluted with water.
• Instructions for Use – Stir well before use to ensure paint is thoroughly mixed. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge giving you a levelled finish. A tintable primer is recommended when making dramatic colour changes to avoid additional coats. Touch dry in about 1 hour. Allow 2-4 hours between coats. When using a sprayer, refer to the sprayer user guide for full instructions before use. You can dilute this paint with water, however, when you dilute the formula you dilute the quality. Therefore, we cannot guarantee the claims we make on pack if the formula is diluted with water.

Features and benefits

• High opacity & covering power
• Superior durability & scrubbable
• Stain resistant
• For interior walls & ceilings
• Suitable for a brush, roller or sprayer
• Water based formula
• Up to 17m² per Litre
• Minimal VOC