Description
Features:
- Developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration.
- One touch sliding chuck for easy bit installation and removal.
- Easy to operate operation-mode change lever – Located on the top of the motor housing for reduced possibility of breakage.
- “Soft no load” function automatically reduces the motor speed during idling to suppress the vibration of the machine body.
- LED service light indicates when to replace carbon brush.
- In hammering mode, on/off switch is switchable between two switches to meet your application. For Continuous or Intermittent chiselling applications.
- AVT – The Anti Vibration Technology system has an active dynamic vibration absorber which ensures operation with extremely low vibration.
- The damper spring behind the drill bit absorbs reaction force caused by the drill bit at the moment of impact.
- The damper springs in the handle separate he handle from the machine body, further reducing the vibration.
- Designed with flat sided body for ease of handling.
- Double insulation.
Technical data:
- Voltage – 110V
- Input wattage – 1000W
- Net weight – 6.8-6.9kg
- Impact energy – 8.0 Joules
- Max. capacity: Concrete – 40mm
- Impacts per minute – 1450-2900ipm
- No load speed – 250-500rpm
- Vibration K factor – 1.5m/sec²
- Vibration: Chiselling – 4.5m/sec²
- Vibration: Hammer drilling – 5m/sec²
- Warranty – 3 Years
- Wattage – 1000W
- Brand – Makita
Supplied with:
- Side handle
- Depth stop
- Bit grease
- Carry case
Reviews
There are no reviews yet.