Bostik Cementone Wintaplas Chloride Free Frostproofer & Accelerator 5ltr

Description

Bostik Cementone Wintaplas Chloride Free Frostproofer & Accelerator 5ltr

Bostik Accelerator & Frostproofer is a specially formulated liquid that accelerates the setting of mortar mixes, making it ideal for use in cold weather, particularly during winter months. This product is designed to improve workability by plasticising the mix, ensuring consistent results in challenging conditions. Whether you’re working on bricklaying, rendering, blockwork, or mortars containing embedded metal, Bostik Accelerator & Frostproofer enhances the efficiency and quality of your work.

It is especially suitable for use in colder climates where setting times can be extended. This product is formulated to work with Portland cement (CEM I) and Portland-fly ash cement (CEM II/B-V). It is a chloride-free solution that does not interfere with the integrity of mortar or concrete mixes, making it a safer choice compared to calcium chloride-based accelerators.

Features:

• Accelerates the setting time of mortar mixes, particularly in cold weather and winter months.
• Plasticises the mix to improve workability and handling.
• Ideal for bricklaying, rendering, blockwork, and mortars containing embedded metal.
• Chloride-free, making it safe for use in non-structural applications without affecting the integrity of the mix.
• Complies with EN 934-3 standards for reliable performance.

Technical Data:

• Brand – Bostik
• Range – Cementone
• Product Type – Chloride-Free Frostproofer & Accelerator
• Size – 5ltr
• Colour – Orange
• Form – Thin Liquid
• Composition – Chloride-Free Nitrate Solution
• Specific Gravity – Approx. 1.1

Application:

1. Shake well before use. Add to gauging water at the appropriate dosage. Reduce gauging water accordingly.
2. Ensure the sand for mortar complies with British Standards, and all work is carried out in accordance with BS EN 1996 parts 1 & 2 and PD 6697: 2010.
3. Always use fresh cement and ensure all materials are free from ice. The temperature of the mix prior to placement should not be below +4°C.
4. Keep the mortar above freezing point until minimum strength is attained by covering with a plastic sheet.

Cleaning:

• Clean tools and equipment immediately after use with water.

Standards & Certifications:

• Complies with EN 934-3 standards.