Description
Compatible with ClassicBond and ClassicBond Pro membranes, this flashing membrane features an approximately 1.5mm thick, uncured EPDM membrane laminated to a 0.76mm thick, fully cured pressure-sensitive adhesive.
Features:
- Primarily designed for flashing irregular pipes, penetrations, and other details, it proves ideal for versatile applications.
- Its flexibility allows easy moulding to irregular shapes and surfaces. The self-curing property makes it suitable for flashing pipes, scuppers, and various roof system structures and penetrations.
- Adaptable to irregular shapes and surfaces.
- Self-curing membrane.
- Labour and cost savings in field applications.
Technical data:
- Brand – ClassicBond
- Product Type – Pressure Sensitive Elastoform Uncured Flashing
- Material – EPDM / Synthetic Rubber
- Colour – Black
- Thickness – 1.5mm
- Nominal Thickness – 2.29mm
- Width – 228mm
- Nominal Width – 229mm Membrane / 233mm Adhesive
- Length – Sold Per Metre
- Elongation – 480% Min.
- Brittleness Temperature – -45°C
Please Note:
- Avoid prolonged skin contact; wash affected areas with soap and water if necessary.
- High jobsite temperatures exceeding 32ºC may impact product shelf life.
- During warm, sunny weather, store PS Elastoform Flashing rolls in their box or a shaded area until ready for use.
- Storage or use below 4ºC may result in adhesive tack loss; maintain a minimum temperature of 15ºC during overnight storage. Provide hot boxes for jobsite storage to maintain a minimum product temperature of 4ºC.
- Ensure storage in a dry area.
- Be cautious of solvent flash-off; if condensation develops, discontinue application until the surface is dry. Allow for proper conditions before applying Primer and PS Elastoform Flashing.
- Prevent contact with waste products or direct steam venting.
- In colder temperatures, use a heat gun as specified for forming PS Elastoform Flashing.
- Keep the product out of the reach of children.
Reviews
There are no reviews yet.