Danosa Polydan 180-60 / GP Elast Non Woven Polyester Felt – 8m x 1m (8m2)

Description

Bituminous SBS modified capsheet reinforced with a heavy non-woven polyester felt. The upper surface is finished with mineral chipping. The underside has a quick-melt thermofusible film. Designed for torch-applied applications and Safe2Torch details using hot-air.

Scope

• Basement wall waterproofing.
• Capsheet of two-layer membranes with mineral self-protection for waterproofing boards.
• Capsheet membrane in waterproofing systems for carpark areas (parking roofs, rolling surfaces, etc.), where the agglomerate can be poured directly on top of the membrane.
• Capsheet in multi-layer waterproofing systems.
• Capsheet in single-layer waterproofing systems.

Advantages & Benefits

• High movement capability.
• The higher grammage of the polyester reinforcement gives the sheet higher mechanical performance in tensile, static and dynamic piercing.
• Suitable for waterproofing buried structures (basement walls).
• Suitable for waterproofing structures subject to vehicular traffic (road and railway decks, rolling and carpark roofs,, etc.) with a favourable technical evaluation (check relevant certifications).
• High tensile strength and high elongation at break.
• High resistance to static and dynamic piercing.
• Rot-proof.
• Very stable in the long term.
• Has good piercing protection from possible mechanical damage, derived from the occasional pedestrian traffic typical of flat roofs.