Description
Features:
- Trade worktop jig for up to 700mm worktops.
- Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.
- Left hand and right hand corners, 400mm radius peninsular joint, 45° end cut with slight radius, 45° trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and ¾” BSP hole for mixer taps.
- Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops.
- Cuts up to 40mm thick worktops with or without anti-drip postformed edge.
- Three open-ended bolt recesses (dog bone style) for 150mm bolts.
- Engraved lines for short 65mm bolts and worktop cross-cut.
- 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up.
- Engraved markings for identification of pin holes.
- Pins made from ABS plastic for strength.
Jig requires:
- A portable plunge router with 12.7mm (½”) shank capacity and minimum 1300W
- A template guide bush with 30mm outside diameter ref GB30
- A TCT router cutter with 12.7mm (½”) diameter and 50mm (2″) cut length
- Two clamps
Technical data:
- Length – 985mm
- Width – 390mm
- Thickness – 12mm
- Weight – 5.4kg
- End Cut – 45°
- Corner Radius – 40mm
- Corner radius – 100mm
- Corner radius – 400mm
- Corner mitre joint – 45°
- Female cut material width loss – 35mm
- Brand – trend®
Supplied with:
- 6 x ABS plastic pins
Reviews
There are no reviews yet.